Effect of mesh anchoring technique in uterine prolapse repair surgery: A finite element analysis.

The female pelvic cavity involves muscles, ligaments, endopelvic fasciae and multiple organs where different pathologies may occur, namely the pelvic organ prolapse (POP). The synthetic implants are used for the reconstructive surgery of POP, but severe complications associated with their use have been reported, mainly related to their mechanical properties (e.g., implant stiffness) and microstructure. In this study, we mimicked a transvaginal reconstructive surgery to repair the apical ligaments (uterosacral ligaments (USLs) and cardinal ligaments (CLs)), by modeling, their impairment (90% and 50%) and/or total rupture. The implants to reinforce/replace these ligaments were built based on literature specifications and their mechanical properties were obtained through uniaxial tensile tests. The main aim of this study was to simulate the effect of mesh anchoring technique (simple stich and continuous stitch), and compare the displacement magnitude of the pelvic tissues, during Valsalva maneuver. The absence/presence of the synthetic implant was simulated when total rupture of the CLs and USLs occurs, causing a variation of the vaginal displacement (9% for the CLs and 27% for the USLs). Additionally, the simulations showed that there was a variation of the supero-inferior displacement of the vaginal wall between different anchoring techniques (simple stich and continuous stitch) being approximately of 10% for the simulation USLs and CLs implant. The computational simulation was able to mimic the biomechanical behavior of the USLs and CLs, in response to different anchoring techniques, which can be help improving the outcomes of the prolapse surgery.

Biosurfactant production of Piper hispidum endophytic fungi.

AIMS: To evaluate the production of biosurfactants by fungi isolated from the Amazonian species Piper hispidum (Piperaceae), and to determine the physico-chemical properties of the crude biosurfactant obtained from the most promising fungi. METHODS AND RESULTS: A total of 117 endophytic fungi were isolated, and 50 were used to verify the production of biosurfactants. Of these, eight presented positive results in the drop collapse test, and emulsification index ranging from 20 to 78%. The most promising fungi, Ph III 23L and Ph II 22S (identified as Aspergillus niger and Glomerella cingulata, respectively) were recultivated for extraction and analysis of the biosurfactant's physico-chemical characteristics. The cultivation broth that presented the greatest decrease in surface tension (36%) was that of the A. niger, which reduced it from 68·0 to 44·0 mN m-1 . The lowest critical micellar concentration value was found for the same endophyte (14·93 mg ml-1 ). CONCLUSIONS: Endophytes of P. hispidum proved to be interesting producers of biosurfactants and presented promising physico-chemical characteristics for applications in diverse industrial sectors. SIGNIFICANCE AND IMPACT OF THE STUDY: Piper hispidum endophytic fungi can be used as a new source of biosurfactants, as these molecules present a significant market due to their wide industrial applications.

Characterization of the passive and active material parameters of the pubovisceralis muscle using an inverse numerical method.

The mechanical characteristics of the female pelvic floor are relevant to understand pelvic floor dysfunctions (PFD), and how they are related with changes in their biomechanical behavior. Urinary incontinence (UI) and pelvic organ prolapse (POP) are the most common pathologies, which can be associated with changes in the mechanical properties of the supportive structures in the female pelvic cavity. PFD have been studied through different methods, from experimental tensile tests using tissues from fresh female cadavers or tissues collected at the time of a transvaginal hysterectomy procedure, or by applying imaging techniques. In this work, an inverse finite element analysis (FEA) was applied to understand the passive and active behavior of the pubovisceralis muscle (PVM) during Valsalva maneuver and muscle active contraction, respectively. Individual numerical models of women without pathology, with stress UI (SUI) and POP were built based on magnetic resonance images, including the PVM and surrounding structures. The passive and active material parameters obtained for a transversely isotropic hyperelastic constitutive model were estimated for the three groups. The values for the material constants were significantly higher for the women with POP when compared with the other two groups. The PVM of women with POP showed the highest stiffness. Additionally, the influence of these parameters was analyzed by evaluating their stress-strain, and force-displacements responses. The force produced by the PVM in women with POP was 47% and 82% higher when compared to women without pathology and with SUI, respectively. The inverse FEA allowed estimating the material parameters of the PVM using input information acquired non-invasively.

Biomechanical properties of the pelvic floor muscles of continent and incontinent women using an inverse finite element analysis.

Pelvic disorders can be associated with changes in the biomechanical properties in the muscle, ligaments and/or connective tissue form fascia and ligaments. In this sense, the study of their mechanical behavior is important to understand the structure and function of these biological soft tissues. The aim of this study was to establish the biomechanical properties of the pelvic floor muscles of continent and incontinent women, using an inverse finite element analysis (FEA). The numerical models, including the pubovisceral muscle and pelvic bones were built from magnetic resonance (MR) images acquired at rest. The numerical simulation of Valsalva maneuver was based on the finite element method and the material constants were determined for different constitutive models (Neo-Hookean, Mooney-Rivlin and Yeoh) using an iterative process. The material constants (MPa) for Neo-Hookean (c1) were 0.039 ± 0.022 and 0.024 ± 0.004 for continent vs. incontinent women. For Mooney-Rivlin (c1) the values obtained were 0.026 ± 0.010 vs. 0.016 ± 0.003, and for Yeoh (c1) the values obtained were 0.031 ± 0.023 vs. 0.016 ± 0.002, (p < 0.05). Muscle displacements obtained in the numerical simulations of Valsalva maneuver were compared with the muscle displacements obtained through additional dynamic MRI. Incontinent women presented a higher antero-posterior displacement than the continent women. The results were also similar between MRI and numerical simulations (40.27% vs. 42.17% for Neo-Hookean, 39.87% for Mooney-Rivlin and 41.61% for Yeoh). Using an inverse FEA coupled with MR images allowed to obtain the in vivo biomechanical properties of the pelvic floor muscles, leading to a relationship between them for the continent and incontinent women in a non-invasive manner.

Establishing the biomechanical properties of the pelvic soft tissues through an inverse finite element analysis using magnetic resonance imaging.

The mechanical characteristics of the female pelvic floor are relevant when explaining pelvic dysfunction. The decreased elasticity of the tissue often causes inability to maintain urethral position, also leading to vaginal and rectal descend when coughing or defecating as a response to an increase in the internal abdominal pressure. These conditions can be associated with changes in the mechanical properties of the supportive structures-namely, the pelvic floor muscles-including impairment. In this work, we used an inverse finite element analysis to calculate the material constants for the passive mechanical behavior of the pelvic floor muscles. The numerical model of the pelvic floor muscles and bones was built from magnetic resonance axial images acquired at rest. Muscle deformation, simulating the Valsalva maneuver with a pressure of 4 KPa, was compared with the muscle displacement obtained through additional dynamic magnetic resonance imaging. The difference in displacement was of 0.15 mm in the antero-posterior direction and 3.69 mm in the supero-inferior direction, equating to a percentage error of 7.0% and 16.9%, respectively. We obtained the shortest difference in the displacements using an iterative process that reached the material constants for the Mooney-Rivlin constitutive model (c10=11.8 KPa and c20=5.53 E-02 KPa). For each iteration, the orthogonal distance between each node from the group of nodes which defined the puborectal muscle in the numerical model versus dynamic magnetic resonance imaging was computed. With the methodology used in this work, it was possible to obtain in vivo biomechanical properties of the pelvic floor muscles for a specific subject using input information acquired non-invasively.

Study on the influence of the fetus head molding on the biomechanical behavior of the pelvic floor muscles, during vaginal delivery.

Pelvic floor injuries during vaginal delivery are considered a significant risk factor to develop pelvic floor dysfunction. The molding of the fetus head during vaginal delivery facilitates the labor progress, since it adjusts to the birth canal geometry. In this work, a finite element model was used to represent the effects induced by the passage of the fetus head on the pelvic floor. The numerical model used for this simulation included the pelvic floor muscles attached to the bones, and a fetus body. The model of the fetus head included the skin and soft tissues, the skull with sutures and fontanelles, and the brain. The fetus head movements during birth in vertex position were simulated: descent, internal rotation and extension. Two models of the fetus head were compared: a rigid and a deformable one, with the inclusion of the cranial sutures. The influence of the fetus head molding on the pelvic floor muscles was analyzed by evaluating their reaction forces, stretch, and stress and strain fields. Additionally, anatomical indices for the molding of the fetal skull were obtained and compared with clinical data. The passage of the deformable fetus head through the birth canal leads to a reduction of 17.3% on the reaction forces on the pelvic floor muscles when compared to the ones of a rigid head. Furthermore, the fetus head molding implies inferior resistance to rotation resulting in a reduction of 1.86% in muscle stretching. Quantitative evaluation of the fetus head molding showed good agreement with clinical experiments.